Taizhou Shenneng Electric Co.,Ltd
PRESSURE TANK

PB Series Pressure Tank


Productde Scriptions:

PB Series Pressure Tank could be applied to variety of drinking water system. Including turbocharging system, thermal expansion, water  pump system and protecting water hammer. 

PB Series Pressure Tank are made up of nature polypropylene liner and  high quality butyl rubber diaphragm which is approved by FDA.Theseparts are fixed to the tank wall with the steel lock ring. Brass value is sealed by the thread O-ring bonnet to prevent air leakage.Water comes into   the pressure tank by stainless steel pipe. Stregthening specified quick-wearing regions in the diaphragm and liner toprolong life. In order to prevent  the diaphragma is punctured in extreme conditions, all components adopts circular design, including valve.Water pipe combined with fittings is  unique to double-layer water/gas seal. It is completely airtight and without any maintenance.On the external of the pressure tank,  adds a layer of double polyurethane paint coating to the outside of the layer of epoxy undercoat to provide hundreds of hours for UV protection.

To ensure structure and consistent quality of each pressure tank,it must be passed multiple stages of quality testing on the production line, 

Characteristics:

1. Single diaphragm design

2. Over-current components are safe and non-polluting. Products conform to drinking  water standards 

3. Nature polypropylene liner 

4. Double polyurethane, senior epoxy paint coating

5. Airtight O-ring sealed bonnet

6. Fully test

7. Without any maintenance

8. According to the product installation instructions, we can provide 5 years for product warranty


Other Products
    Message